      |
|
BANKNOTE
READER JAPAN CASHMACHINE (ready for EURO)
NEW !! EBA-03 BANKNOTE READER
|
|
WORLD INNOVATION : EBA30 BILL ACCEPTOR
Technologically advanced banknote reader, featuring a new
"BANKNOTES SELF CENTERING MECHANISM".
This system automatically straighten the banknotes
inserted with crooked angle, stacking them perfectly.
This means BEST ACCEPTANCE, LESS JAMMING,
BEST SECURITY and EASIEST UTILIZATION.
Anti - fishing mechanism included, can accept notes from 62 to 85 mm.
, including 500 Euro and 50 Pounds. Available with or without stacker
|
 |
|
MAIN
FEATURES:
- Accepted banknotes width min. 61 max 73 mm
- Accepting ratio: 90% or more
- VERY FAST !, accepting time only 2 sec.
- Escrow system for single note
- Antifishing sensors included
- Operating power supply 12 Vcc, 2.5 Va min, 6 Va max.
- Temp. Oper.: 0-50°, umidity max 85%
- Not affected by sunlight
- Interfacing lines: serial TTL o ad pulse
- Optional interfaces: RS232 and parallel
- Weight 0.6 Kg. only
- Dim. (exc. mouthpiece) 99x90x68.8 mm. ; inc. mouthpiece)
128x90x68.8
- VERY LOW PRICE !
|
|
|
OTHER
BANKNOTE READER EBA SERIES
AN
ECONOMICAL AND RELIABLE BANK NOTES READER WITH OPTICAL SENSORS
AND SINGLE CONVEYOR BELT. DESIGNED TO ACCEPT BANKNOTES WITH
A MINIMUM 61, MAXIMUM 78 MM. WIDTH AND A MINIMUM 130 MAXIMUM
162 MM. LENGTH.
SIZE: WIDTH CM. 10, HEIGTH CM 9, DEPTH CM. 10, INLUDING
MOUTHPIECE CM. 13.
POWER SUPPLY: 12 V C.C., OPER. CONS. 750 mA. MAX 1A
INTERFACING: TTL AND CMOS COMPATIBILE SIGNALS, 2 INLETS
AND 4 OUTLETS; PULSE, PARALLEL AND SERIAL INTERFACES AVAILABLE.
SINGLE NOTE "ESCROW" AVAILABLE, I.E. POSSIBILITY TO RECOGNISE
THE INSERTED NOTE, GIVE THE VALUE, AND WAIT FOR ACCEPTING
OR REJECTING SYGNAL.
ANTIFISHING DEVICE (PB UNIT) AVAILABLE, TO AVOID “FISHING”
OF THE INSERTED NOTE, THROUGH NYLOW WIRES OR SIMILAR METHODS.
THIS DEVICE CAN BE INSTALLED ALSO SEPARATELY.
THIS PRODUCT IS FOR ITALIAN LIRA CURRENCY ONLY, BUT IS
READY FOR EURO!
SOFTWARE VERSON FOR ITALIAN MARKET: ITA1 (1000,2000,5000,10000)
and ITA8 (1000,2000,5000,10000,50000,100000) 4 directions
|
MOD. EBA 02
MOD. EBA 02 PB |
|
JAPAN
CASHMACHINE MODELLO EBA11 ED EBA12
BANKNOTES
ACCEPTOR WITH SIMILAR FEATURES AS THE FORMER ONE BUT WITH
FOLLOWING ADDITIONAL CHARACTERISTICS.
RECOGNIZING SYSTEM WITH OPTICAL AND MAGNETIC SENSORS
LARGER SECURITY FOR RECOGNITION AND SELECTION OF THE FALSE
ACCEPTANCE OF BANK NOTES ON ALL DIRECTIONS
ACCEPTANCE OF BANKNOTES UP TO 78 mm. WIDTH
SOFTWARE DEVELOPED FOR ALMOST ALL CURRENCIES OF THE WORLD
(SEE LIST INTO MAIN EBA 12: SIMILAR TO EBA11 BUT ACCEPTING
NOTES UP TO 85 mm. WIDTH
|
|
|
EB200
:
New
concept of Bill Acceptor with in-built stacking mechanism
The
notes are stacked in the internal container, it's sufficient
to opern the frontal or the back door to collect the notes.
There is NOT an internal box as in the normal stacker. The
product accepts notes up to 80 mm (50 Euro). Dim. 180x93x193;
The other characters are similar to EBA03.
|
|
STACKERS
SD2 STACKER: CAPACITY 400 O 600 BANCONOTES, THE
NOTES ARE RETURNED PERFECTLY PACKED IN PILE. ANTIFISHING
UNIT ALREADY INCLUDED. Dim. H35 L10 W19 Cm.
KUBICO STACKER EXCLUSIVE ULTRACOMPACT MODEL; CAPACITY’
250 BANKNOTES BANKNOTES CAN BE COLLECTED FROM THE BACK
OR FROM THE FRONT Dim. H17 L.10 W20 Cm.
STKEBA HORIZONTAL STACKER HORIZONTAL MODE, BANKNOTE
CAN BE COLLECTED FROM THE REAR OR FROM THE BOTTOM CAPACITY’
500 NOTES . DIMENSION H18 L.13 D30 Cm. THIS PRODUCT IS
NOT ORIGINAL JCM
ULTRACOMPACT ANTIFISHING UNIT THIS ANTIFISHING
UNIT IS ONLY 4 Cm. DEEP, SO IT CAN BE USED WHEN THERE
IS NO SPACE IN THE BACK OF THE VALIDATOR FOR THE ORIGINAL
P.B. UNIT, HOWEVER IT CANNOT ENSURE 100% FISHING PROTECTION
Dim. H6 L.9 P4 Cm.
BILL
VALIDATORS BOXES
ECONOMICAL
BILL VALIDATOR SIDEBOX THIS MODEL CAN BE MOUNTED IN
THE RIGHT OR LEFT SIDE OF THE MACHINE (PLEASE SPECIFY
BEFORE PURCHASING); THE BILL VALIDATOR CAN BE INSTALLED
WITH OR WITHOUT P.B. UNIT, BUT NO STACKER CAN BE INSTALLED
Dim. H35.5 L12.5 P20 Cm. GREY COLOR, OR DIFFERENT ON REQUEST
PROFESSIONAL BILL VALIDATOR SIDEBOX SOPHISTICATED
MODEL, WITH FRONTAL ACCESS, LCD DISPLAY ON THE HEAD. AVAILABLE
WITH P.B. UNIT OR WITH STACKER SD2 OR KUBICO Dim. H46
L.14 D22.5 Cm.
|
|
6
CHANNEL PARALLEL INTERFACE
Simple parallel interface that activate one channel in
relation to the inserted banknotes. The channel remain
active for about 100 msec.. It can also be used for direct
sobstitution of a Smiley validator with an EBA, without
modifying the existing connector.
OTHER
INTERFACES FOR EBA SERIES BANKNOTE VALIDATOR:
JCM1
RELAY SERIAL INTERFACE (CREDIT CHARGE): IT TRANSFORMS
OUTLET SIGNALS INTO PULSES GENERATED BY A RELAY. THE NUMBER
OF PULSES DEPENDS ON THE INSERTED BAN NOTE (EX., 1.000
LIRAS 1 IMPULSE, 5.000 LIRAS 5 IMPULSES) AND CAN BE CHANGED
THROUGH MICROSWITCHERS (EX., 1.000 LIRAS 2 IMPULSES, 5.000
LIRAS 10 IMPULSES AND SO ON). THE LASTING OF EACH IMPULSE
CAN ALSO VARY FROM 1.000 mSec. OR 0,1 Sec. USUALLY THIS
KIND OF INTERFACE IS USED TO CHARGE CREDITS IN COIN MACHINES
CONNECTING IT IN PARALLEL TO THE EXISTING COIN BOX.
JCM2 COIN DISHARGE INTERFACE: THIS INTERFACE WAS
DESIGNED TO BE INTERPOSED TO A COIN DISPENSER SO THAT
WHEN A BANK NOTE IS INSERTED IT OCCURS A COIN DISCHARGE
OF THE SAME VALUE OF THE INSERTED BANKNOTE. SUCH A DISPENSER
MAY BE AN INTEGRATING PART OF AN EXISTING MACHINE AS THE
APPLICATION OF THIS INTERFACE NORMAL DISPENSER USE. IT
IS USUALLY EMPLOYED IN AUTOMATIC ENTERTAINMENT OR GAMBLING
MACHINES.
INTERFACCIA RS 232: DIRECTLY INTERFACE TO ANY MS-DOS
COMPUTER SERIAL PORT, THIS DEVICE PERFORM EMULATION OF
THE ESCROW MODE OF THE BILL ACCEPTOR. DEMO.
|
|
|
EBA
TEST BENCH
Very simple and cheap test bench, for
a complete testing and repairing of EBA validators. It can
also adjust optical sensors, in combination with a MSDOS
computer and a serial interface (optional).
|
|
FIXING
DEVICES: MANY DIFFERENT SOLUTIONS AVAILABLE, SUCH AS FRONTAL
PANELS, WITH OR WITHOUT LOCKER, 90’ANGLE FIXING DEVICES
ETC.
ANTILIGHT MOUTHPIECE AVAILABLE
COMPLETE VIDEOGAMES FRONTAL DOORS WITH COINMECH AND BILL
VALIDATOR
Frontal
panel with locker
|
|
|
|
|
|
|
