JAPAN CASHMACHINE WBA SERIES READY FOR EURO !

NEW ULTRAPROFESSIONAL BANKNOTE READER, DESIGNED FOR HIGH SECURITY, HIGH PERFORMANCE AND HEAVY DUTY. 500 NOTES UP OR DOWN STACKER INCLUDED; CAN BE USED FOR INDOOR OR OUTDOOR APPLICATION. CAN ACCEPT NOTES UP TO 80 mm. LARGE, AND IT’S NOT AFFECTED BY DIRECT SUNLIGHT.
FOR THIS MODEL A VERY PROFITABLE ESCROW SYSTEM (FOR 18 NOTES) IS AVAILABLE (SEE BOTTOM PAGE)
THIS MODEL IS PARTICULARY SUITABLE FOR SELF SERVICE INTO GAS STATIONS, TICKET VENDING MACHINES FOR TRAINS, PARKING ETC..
SOFTWARE AVAILABLE FOR MOST OF WORLD CURRENCY (SEE LIST IN THE MAIN PAGE)
MULTI-SOFTWARE BOARD AVAILABLE (6 EPROMS), IN ORDER TO SELECT THE DESIRED CURRENCY
PLASTIC OR METAL MOUTHPIECE AVAILABLE, TO BE ORDERED SEPARATELY.
Dim. 11.4x30x22,5 Cm. (without mouthpiece)
NEW! FOR WBA SERIES IS NOW AVAILABLE A NEW PARALLEL INTERFACE EMULATING EBA PROTOCOL (ID 001) AND A SERIAL INTERFACE RS232 WITH WINDOWS DRIVERS !!!

MAIN MODEL:
WBA10 SS : DOWN STACKER, 12 MEGABYTE MEMORY, FOR MAGNETICAL PATTERN NOTES (U.S. DOLLAR, AUSTRALIAN DOLLAR, YEN). THE SOFTWARE IS EEPROM RESIDENT (FLASH MEMORY), AND MUST BE LOADED THROUGH RS232
WBA11 SS: SIMILAR TO WBA10, BUT SOFTWARE IS EPROM RESIDENT
WBA20 SS : DOWN STACKER, 1 MEGABYTE MEMORY, FOR GRAPHIC-MAGNETIC PATTERN BANKNOTES (ALL EXCEPT DOLLAR AND YEN) SOFTWARE RESIDENT INTO FLASH MEMORY, TO BE LOADED FROM RS232
WBA21 SS : SAME AS WBA20, BUT SOFTWARE EPROM RESIDENT
WBA21 SU : SAME AS WBA21SS, BUT WITH UP STACKER
WBA22-23 SU – SS: SAME AS WBA20-21, BUT WITH 4 MEGABYTE MEMORY
WBA24 - 25 SS SU SH ; Same as previous, but with larger mouth,
in order to acceptr banknotes up to 82 mm. (For ex. 500 € )
WBA24 - 25 LD2 LU2 : Same as previous, but without stacker

ESCROW MODULUS "ESCROW1" ESCROW 1
is a working unit which can be utilized in association with different kinds of bill-coin validators. It can completely handle with every type and model of coin and bill normally used for the payment of services. The validated bank-notes (max. 16) are placed in an intermediate cash-box, where they remain till the user's operation is finished; after that they can definitively be located in the main cash-box. Otherwise ESCROW 1, in case of escrow modality or incomplete payment of the right amount or choice of a not avalilable /false service, gives you the possibility of having the inserted bank-notes back. The unit ESCROW 1 can be utilized wherever the self service distribution of different kinds of products( like tickets, fuels, telephone cards, sweets, games etc.) could be requested. Main unit The main unit is composed by a transfer system which, through mechanical supports, transfers the bank-notes into an opening representing the intermediate cash-box. When collected, the bank-notes are located in an anti-infractio safety cash-box. In case of return of the inserted bank-notes, these, through a specifical operation,are transferred to a bank-notes exit, where the user can pick them up. Bank-notes cash-box The bank-notes cash-box can contain up to 1000 bank-notes of different type and value, normally accepted by the bill-coin validator. The bill-coin entry is placed on the frontal face of the working unit (in this way it is possible to eliminate all the accessories needed to pull out the cash-box, like telescopic guides, supports, cumbersome fastenings). The cash-box containing the money can be entered through a lock with key, placed on the outside of the main structure; it can be pulled out through a suitable latch, which unhooks the cash-box and, at the same time, forbids the money entry. The cash-box will be pulled out and set up only by an authorized operator. Electronical features The working unit ESCROW 1 is provided with an electronical system based on a micro-controller, which handles with the movements of the working unit and at the same time exchanges data through a serial communication unit (e.g. a Personal Computer). Commands can be tansmitted to the working unit also in parallel way (through I/O), if the unit functions in stand alone modality. It has been foreseen a two level self-diagnostc check for the peripheral units of the working unit. The first level is represented by a led, which switches on if the mechanism is out of service. The second level is represented by a serie of codes that the working unit sends to the Host Computer to identify what kind of anomaly occured. The self-diagnostic check includes also a list of the previous out of service, which memorizes the last 50 codes. The present model has 2 serial lines: -Serial line 1 dedicated only to the exchange of data with the Computer. -Serial line 2 dedicated to the exchange of data between the board and the bill coin validator. In this way we will have the complete control of the 2 units ( bill-coin validator and intermediate cash-box) by using one serial line of the Host Computer only. Should the mechanism be interfaced with another kind of bill-coin validator, the communication system with the Host Computer would never be changed.
ELECTRICAL FEATURES
Power supply 24VCC +/- 5%
Current 80mA Standby , 200mA working
Serial interface RS232
Baud rate 9600 Given bits 8 Parity none Stop bits 1
Dimensions H = 380mm L = 150mm P = 300mm